Milwaukee’s Official Statement on Our Video About Impact Issues
Published at : October 11, 2022
We've been exchanging emails with Milwaukee for the past month with our findings to get this H96B matter addressed. They emailed our channel this statement at 12:11PM PST 10/7/22 to share with you:
Hello,
We have been working diligently this week to investigate the issue and have included the official statement from Milwaukee below.
Official Statement
We have recently learned that a number of users are experiencing issues with their 2767-20 ½” High Torque Impact Wrench w/ Friction Ring, and quickly launched an in-depth investigation to understand the claims.
Upon investigation, 2 distinct issues were uncovered:
We recently implemented a new mechanical design in the model 2767-20. This new design is distinguished by “H96B” in the serial code. This new design has not held up to the Milwaukee name and will no longer be sold. Our developmental testing of this mechanism did not reveal the symptoms described by users, but the feedback is clear, and our decision to replace product is ultimately the right thing to do for them. We will continue to produce the original design that has been on the market for years, that is distinguished by “H96A” in the serial code. We will immediately stop production of the new design distinguished by “H96B” in the serial code.
There are also variances in electrical tolerances that may cause some tools to “stutter”. This was exacerbated by the new mechanical design in 2767-20 inventory that is distinguished by “H96B” in the serial code.
If users are experiencing an issue, they are encouraged to send their tool in for repair or replacement by utilizing our eService portal - http://bit.ly/2cwwBwJ. All products with the “H96B” distinction on the serial code will be replaced with “H96A”.
Frequently Asked Questions
If I wanted to purchase the 2767, but am hesitant to do so until inventory with the original design is available, what should I do?
There is currently a mix of “H96A” and “H96B” serial codes for the 2767-20 in inventory at authorized Milwaukee Distributors
The ONLY product affected is the 2767-20 in bare tool packaging distinguished by “H96B” in the serial code. These products are being sent back to Milwaukee Tool and will be replaced with inventory of “H96A” by November 1st.
Why did you make the design change at all? Why mess with a good thing?
Products can change several times within their lifetime for a variety of reasons, but the goal is always to exceed the users’ expectations. This time we clearly did not hit the mark.
Will the new tool have the same level of performance as the original?
Yes, we are reverting back to the original “H96A” mechanical design that has been on the market for years.
Why didn’t you catch this before it went to market?
A thorough investigation is in progress. We applied the exact same test parameters for both the original and the new design.
0:00 Intro (Sry, i suck at Livestream)
1:17 Statement reading
5:13 Thoughts
12:44 Questions
22:49 Statement read w/ opinions
29:59 Channel Questions
38:00 Quick readthrough for latecomers
40:47 Final thoughts and Q's
Hello,
We have been working diligently this week to investigate the issue and have included the official statement from Milwaukee below.
Official Statement
We have recently learned that a number of users are experiencing issues with their 2767-20 ½” High Torque Impact Wrench w/ Friction Ring, and quickly launched an in-depth investigation to understand the claims.
Upon investigation, 2 distinct issues were uncovered:
We recently implemented a new mechanical design in the model 2767-20. This new design is distinguished by “H96B” in the serial code. This new design has not held up to the Milwaukee name and will no longer be sold. Our developmental testing of this mechanism did not reveal the symptoms described by users, but the feedback is clear, and our decision to replace product is ultimately the right thing to do for them. We will continue to produce the original design that has been on the market for years, that is distinguished by “H96A” in the serial code. We will immediately stop production of the new design distinguished by “H96B” in the serial code.
There are also variances in electrical tolerances that may cause some tools to “stutter”. This was exacerbated by the new mechanical design in 2767-20 inventory that is distinguished by “H96B” in the serial code.
If users are experiencing an issue, they are encouraged to send their tool in for repair or replacement by utilizing our eService portal - http://bit.ly/2cwwBwJ. All products with the “H96B” distinction on the serial code will be replaced with “H96A”.
Frequently Asked Questions
If I wanted to purchase the 2767, but am hesitant to do so until inventory with the original design is available, what should I do?
There is currently a mix of “H96A” and “H96B” serial codes for the 2767-20 in inventory at authorized Milwaukee Distributors
The ONLY product affected is the 2767-20 in bare tool packaging distinguished by “H96B” in the serial code. These products are being sent back to Milwaukee Tool and will be replaced with inventory of “H96A” by November 1st.
Why did you make the design change at all? Why mess with a good thing?
Products can change several times within their lifetime for a variety of reasons, but the goal is always to exceed the users’ expectations. This time we clearly did not hit the mark.
Will the new tool have the same level of performance as the original?
Yes, we are reverting back to the original “H96A” mechanical design that has been on the market for years.
Why didn’t you catch this before it went to market?
A thorough investigation is in progress. We applied the exact same test parameters for both the original and the new design.
0:00 Intro (Sry, i suck at Livestream)
1:17 Statement reading
5:13 Thoughts
12:44 Questions
22:49 Statement read w/ opinions
29:59 Channel Questions
38:00 Quick readthrough for latecomers
40:47 Final thoughts and Q's
Milwaukee’sOfficialStatement